History-File of FB2-firmware V2.06a - No DDC scanning when output resolution is set manually - Some minor features for adjustment/QC V2.05a - Fixed Bug: Brightness oscillation - Some minor features for adjustment V2.04b - Improved AF on working surface - Fixed Bug: Factory reset does not update detail setting. V2.04a - New output settings menu: Resolution and picture size is displayed in menu. - Improved Extern In: Added 16:9 formats (1280x720, 1360x768, 1440x900, 1920x1080) - Change resolution WXGA to CVT standard (1360x768) V2.03d - Internal Update V2.03c - Internal Update V2.03b - Old picture not visible at startup - New return values for S1_GET_PORTRAIT command (serial protocol): 0: 0°, 1: -90°, 2: 180°, 3: +90° V2.03a - VZ-27plus-II support added - New remote control support added - ImageTurn in 16:9 mode shows 3:4 picture (units with synchronised lightfield change light mask) - Auto Exposure more stable - Changed Resolution SXGA+ (1360 x 1024) to 1400 x 1050 for 60 Hz and 75 Hz - Improved shading in 3-CCD units - Text Enhancer assignable to Preset Settings - OSD Menu and Menu Help adapted V2.02e - Internal update V2.02d - Internal update V2.02c: - Important Bugfix: More secure keypad and camera communication. V2.02b: - Internal Update V2.02a: - Fixed bug in HD-Resolution 1080p/i (official timing) - Support new zoom wheel, improved OSD menu control with zoom wheel - Improved noise reduction - New OSD menu: sectional to basic and advanced settings - New demo mode adapted to current units V2.01a: - Attention: Memories get erased after firmware update - "RGB/Preview-Device added" message fixed - ShowAll picture now also available on USB and Ethernet - Improved white balance at startup - Video OFF setting added: New units are shipped with video switched OFF V2.00c: - Internal update (Laser supports new hardware) V2.00b: - Fixed bug: Firmware backup was not installed properly V2.00a: - Minor bug fixes (improved HD support) - New version number because of major improvements since version 1.30a (sRGB color precision) V1.31a: - Internal Update V1.30c: - Internal Update V1.30b: - Fixed a bug in Manual White Balance: If a One-Push-WB was successful and you like to change the values manually, the change has no effect. - Fixed some minor bugs in Adjustment V1.30a: - Color Precision Update (Adaptation to sRGB color standard) - Lamp hours will be documented for each individual bulb. To see and reset the lamp hours there is a new item line in the sub menu (push the menu button for 4 seconds for the sub menu). This is also were the lamp hours will be visible. Also the lamp changer can be initiated if it is unclear which lamp is on. - Improved White Balance: Fast auto-white-tracking Manual White Balance: It is possible to choose manual white balance on the OSD under color settings. It shows R Gain, B Gain and One-Push-WB. When the One-Push-WB was successfully executed all values will be automatically adapted and saved (even through a power off/on cycle). - Improved auto-gain settings - Added new RS232 Codes for change lamp and custom serial mode (see serial protocol on WolfVision homepage) - Added new USB commandos for remote control V1.22b: - Internal Update: ImageMirror had a wrong value V1.22a: - Improved help texts - Added new feature: AMX device discovery over RS232 - Fixed bug: Imageturn picture appears correctly in Show All. - Fixed bug: Wrong focus position when preset is recalled. - Fixed bug in ethernet part: Ethernet remote control shows some text lines or ethernet connection hang up. - Fixed bug in ethernet part: When ethernet packet is too large, ethernet connection hang up. V1.21a: - Added new feature: Mirror vertically and horizontally. Setting is done in the OSD Extra Menue and remains even at power off. - Fixed bug: Wrong behaviour of Presets, when Power On Preset is set to "off". V1.20a: - Added new resolutions: VGA/60 (640 x 480, 60Hz, 4:3) Required for HDTV XGA 16:9 (1024 x 768, 60Hz, 16:9) Special 16:9 resolution for older plasma monitor WXGA/60 (1366 x 768, 60Hz, 16:9) Resolution for Widescreen monitor WSXGA/60 (1680 x 1050, 60Hz, 16:9) Resolution for Widescreen monitor 720p/50 (1280 x 720, 50Hz, 16:9) HDTV resolution (progressive scan) 720p/60 (1280 x 720, 60Hz, 16:9) HDTV resolution (progressive scan) 1080p/50 (1920 x 1080, 50Hz, 16:9) HDTV resolution (progressive scan) 1080p/60 (1920 x 1080, 60Hz, 16:9) HDTV resolution (progressive scan) - Added Statuspage to Ethernet - Added lamp status (available at RS232 or Ethernet) - Fixed bug: Image Turn message not disappear on preview monitor when control via RS232 - Fixed bug: sporadic white balance problems V1.13a: - new commands for USB Software - Fixed bug: Extern In produce error messages when Extern In not connected V1.12i: - Store Autofocus added to Power-On Preset - Improved zoom wheel preformance V1.12h: - Fixed bug: new defined CCD temperature constant (sometimes vertical stripes at low temperature) V1.12g: - Internal updates only! V1.12f: - Store Power-On Preset added to Power Settings V1.12e: - Image On/Off implemented, assignable to Preset Settings - Iris Priority implemented V1.12d: - Internal updates only! V1.12c: - Fixed a bug in p. correction V1.12b: - Internal updates only! V1.12a: - Fixed a bug in auto-resolution (sometimes wrong refresh-rates were detected/used) - Improved picture-quality on UXGA-DVI V1.11b: - Fixed bug: Factory preset was not always recalled exactly (introduced by V1.10a) - Fixed bug: Unit switched off after 4.25h of inactivity (introduced by V1.10a) V1.11a: - Added SXGA +/- Resolution (1360 x 1024, 60/75Hz) (JVC-DILA) - p. correction implemented V1.10c: - Fixed bug in EEPROM-erase-function (factory-adjustment-use only) V1.10a: - Improved Timing - Resolution SXGA/75Hz on DVI works now - Better accu preformance - OSD-Menu: minor bug fixes - Ethernet: standard-gateway added - RS-232: status of OSD-Menu added in GetStatus - Unit automatically switch off when arm pulled down (Settings in OSD-Menu, Power Settings) V1.00b: - Supports Mainboard Revision 1b V1.00a: (First official release) - RS-232: Added some missing commands, minor bug fixes - USB: Added some missing commands, minor bug fixes - Implemented focus-limiter (about 5cm) to avoid that dirt on close-up-lens gets in focus - Resolution-changes disable FREEZE (otherwise picture was distorted) - Fixed a bug that enabled the freezing of the show-all-display - Fixed a bug that lead to incorrect Extern-In-display on the video-monitor during image-turn - EXTERN can also be activated by pressing POWER for 2 seconds (compatible with VZ-8light/+) - Firmware-Update should no longer destroy image-memories (only valid for units that have already V1.00a installed)