History-File of EYE-10 and PSM-10 firmware V1.10d 29.6.2011 - Fixed dark images about 11 minutes after power on. V1.10c - Fixed typo in "Reset menu." V1.10b - Reset Menu no longer sets the resolution to XGA/60 (leaves it unchanged) V1.10a - Removed white borders on left and right sides - Optimzed digital zoom in 720p and 1280x800 modes V1.09a - Corrected sync-polarity of XGA/75 to positve (!) - Added support for 720p60 and 1280x800, upscaled from 1024x576/640 - New SCOTI-commands to change to new resolutions: 00 F2 08 14 Chk Set 720p60 00 F2 08 15 Chk Set 1280x800, CVT-timing Get resolution returns: 10 for XGA (like on older versions) 16 for 720p (like on EYE-12) 1e for 1280x800 (like on EYE-12) - Changed AE-region to 1024x640 (16:10) for compromise of visible image versus measurement-region in all 3 aspect-ratios (4:3, 16:10, 16:9) V1.08e - Fixed bug: Purple image on first power-on after several hours in standby. V1.08d - Added Pixel Calibration V1.08c - Internal update only! V1.08b - Fixed Kollimator V1.08a - New AF. - Removed unused functions from adjustment menu. V1.07c - Internal update only! V1.07b - Improved AutoFocus - Support new hardware V1.07a - Improved key inquiry. Support long distance remote (via cable). - Erase Memory Settings added to Misc. Settings in OSD menu V1.06a - Internal update only! - Support EYE-10 added V1.05a - New structure OSD menu, similar to other wolfvision units - Erase Memory added to OSD menu - Added shutter settings to OSD menu. After new firmware download, shutter is set to flickerless V1.04a - Added SCOTI-commands for Show OSD Menu (enable/disable Menu button, non volatile) 00 F2 0A A0 Check Show OSD Menu on 00 F2 0A A1 Check Show OSD Menu off 00 F2 0A A2 Check Get Show OSD Menu value (returns 1=OSD Menu disable, 2=enable) - Added SCOTI-commands for Show OSD Messages (enable/disable all OSD messages, non volatile) 00 F2 0A A4 Check Show OSD Messages on 00 F2 0A A5 Check Show OSD Messages off 00 F2 0A A5 Check Get Show OSD Messages value (returns 1=OSD messages disable, 2=enable) - Added SCOTI-commands for User OSD Logo (non volatile) 00 Fx 0A 80 PL PC PT ... Check Write User OSD Logo (Enter Text in Camera-Control-Software Logo Editor) PL=Line 0-14, PC=Column 0-29, PT=ASCII Code of Text (up to 30 characters per line) 00 F4 0A 70 PL PC Check Set Logo Color (PL=line 0-14, PC=color 0-7) 00 F3 0A 81 PL Check Set clear time (PL=seconds 1-255) - Added SCOTI-commands for OSD Message Color (non volatile) 00 F3 0A 90 14 PL Check Set Message Color (PL=color 0-7) - Fixed bug: vertical image frequency changed to 72 Hz after PowerOn V1.03a - Added new baudrate (19200, 38400, 57600). To use new baudrates you need Camera Control V1.3 Software - Added SCOTI-commands for Color/Contrast Setting: 00 F2 04 A0 Check Get Color/contrast Setting (returns 0,1,2) 00 F2 04 80 VL Check Set Color/contrast Setting (VL=0,1,2) V1.02e - Internal update only! V1.02d - OSD menu control over Memorykeys V1.02c - Added SCOTI-commands for PowerOn/Standby and Keylock 00 F2 05 50 Check Power On 00 F2 05 51 Check Power Off (Standby) 00 F2 05 52 Check Get Power State (returns 1=Power Off, 2=Power On) 00 F2 05 60 Check Keylock On 00 F2 05 61 Check Keylock Off 00 F2 05 62 Check Get Keylock State (returns 1=Keylock Off, 2=Keylock On) V1.02b - Infocomm04 Release V1.02a - IR Remote Control has been added - New Keys such as White Balance General Information: More Information could be found on the website www.wolfvision.com under Support/Downloads. If you use the Camera-Control-Software, enter only the data bytes of the command in "Custom Command"-Function. E.g. Power On (00 F2 05 50 Checksum), enter 05 50 in Camera-Control-Software "Custom Command"-Function. Check = checksum VL = value