Room Control Systems

Our Visualizer and Cynap systems are capable of communicating with Room Control Systems or 3rd party applications over their built-in network interfaces. Downloadable Room Control System templates for Cynap and Visualizer systems are for demonstration purposes only. Please adapt them to your individual setup before use on any integration setup.

Some of our Visualizers are also capable of communicating over USB and/or RS232.

Looking for specific version? Please send an email to [email protected] to request an archived version.

Crestron - Cynap

Requirements:
Model 3 controller (MC3 and up) and a touch panel. Latest Cynap firmware

Operating more than one Cynap from a single controller has been enabled but not tested and therefore is not advised.

Current versions:

Older versions:

Crestron database versions below 200 versions will no longer receive regular updates prior to version 1.03.00

Crestron database versions below 200 versions will no longer receive regular updates prior to version 3.04.01

Crestron - Visualizer

Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the Crestron Download Page. Older Visualizer driver can be found here.

Extron

Drivers for WolfVision Visualizers can be downloaded from the Extron Download Page. 

For Cynap Pure, a module is available below that enables control via Extron systems.

AMX

Current versions:

Older versions:

Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the AMX Download Page. Please note that you have to create a user account on the AMX homepage to get access to the driver download area. Creating such an account is free of charge.

Cue

You can download these drivers from the Cue Download Page Be aware that you have to create a user account on the Cue homepage to get access to the driver download area. For creating a user account you have to enter the country you are from and your distributor (distributor has to verify you as customer). Creating a user account is free of charge.

NEETS

NEETS supports the following WolfVision Visualizer Systems with its own device drivers. This makes it very convenient when configuring NEETS control panels to work in combination with our devices.

Further information: www.neets.dk