The Leading Manufacturer
of High End Visualizers

New Stand Alone Video Capture Driver for Microsoft Windows XP, Vista and 7, which can be used without the WolfVision Connectivity Software.

It can be used to capture a video stream from a WolfVision Visualizer in a compatible video capture software (like. VirtualDub, Adobe Premiere, etc.) or webcam software (like Skype, NetMeeting or other applications capable of grabbing video signals from connected cameras).

We have updated the applications area with new pictures.

WolfVision introduces 3+2 years warranty:
End users can now register the serial numbers of their newly purchased units on our registration form in order to extend their warranty period from 3 to 5 years. The warranty extension is valid for units which have been purchased as from the 1st July 2010 onwards (In USA and Canada: 1st January 2010 onwards). Registration has to be made within 3 months of the effective purchase date.

June 30, 2010

Self-adhesive replacement working surfaces:
Although all WolfVision Visualizer working surfaces are resilient and easily cleaned, in certain working environments where, for example, permanent markers or colourants are used, it is naturally possible that the Visualizer’s working surface can be permanently stained. We offer you a solution.

May 26, 2010

Firmware Update for VZ-9plus³, VZ-P18, VZ-P38 and VZ-C12³

New version 1.11 of Connectivity Software for Windows 2000, XP, Vista and 7 (32-bit and 64-bit version).

If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.

We have updated our webpage with the initial release of the FB4-Firmware for P-Series (VZ-P18, VZ-P38).

Due to its outstanding and innovative design, our VZ-9plus³ Visualizer has been honoured by two of the largest and most renowned design competitions in the world.
Check out the new Newsletter

The new "Naturally Green" statement is available now as a website: www.wolfvision.com/green

New three-dimensional animations of all products are online: www.wolfvision.com/360

February 18, 2010

New leaflet about "Naturally Green". Yesterday, today and tomorrow - WolfVision has had a genuine commitment to a clean environment since 1996.

• Naturally Green leaflet (PDF)

February 2, 2010

Various updates introducing new Professional Visualizers VZ-P18 and VZ-P38 which were exhibited for the first time today at ISE Amsterdam 2010.

The most important new pages are:

• Short information page

• Detailed information page

• Detailed brochure (preliminary) in PDF

• New product line brochure in PDF

• Press release

All relevant pages of our English and German homepage were updated with information on the new units (including Dealers Area). Homepages in other languages will follow soon.

February 2, 2010

3 new general application reports:

• Visualizers in Meetings and Seminars (PDF)

• Visualizers in Videoconferencing, Telepresence and Distance Learning (PDF)

• Visualizers in Universities, Schools and Educational Institutions (PDF)
  

September 17, 2009

Final version of Connectivity Software 1.0 for Apple Macintosh.

September 17, 2009

New version 1.10 of Connectivity Software for Windows 2000, XP, Vista and 7 (32-bit and 64-bit version).

If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.

December 7, 2009

Short and detailed information pages of VZ-8 Visualizers and Ceiling Visualizers updated

December 1, 2009

Firmware Update for VZ-8light², VZ-8light³, VZ-8plus² and VZ-8plus³

November 13, 2009

New application report about Visualizer VZ-9plus at district court Karlsruhe, Germany (line of argument at courtrooms)

October 12, 2009

Design Update (New menu bar on top of every page. This menu bar can be found on every page, enabling easier navigation through our homepage)

October 12, 2009

Detailed brochure of new Visualizer VZ-9plus³ (Final version)

October 9, 2009

Short and detailed information pages about new Visualizer VZ-9plus³

October 8, 2009

Navigation / Design of title page slightly updated ("Products" section is now a drop down menu)

October 1, 2009

Detailed brochure of new Visualizer VZ-9plus³ (Please note: This is not the final version of this brochure)

September 29, 2009

360 degrees viewer (3D-animation) of VZ-9plus³

September 28, 2009

New PDF-brochure "Product Line September 2009" (includes new Visualizer VZ-9plus³)

September 28, 2009

Dimension drawings of VZ-9plus³

September 28, 2009

User manual of VZ-9plus³

September 14, 2009

BETA version 1.0 of Connectivity Software for Apple Macintosh.
The final version of this software will be released here soon.

September 9, 2009

New version 1.9 of Connectivity Software for Windows 2000, XP, Vista and now also for Windows 7 (32-bit and 64-bit version).

Important: This software version solves a bug which was caused by a currently released Windows Update from Microsoft.

If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.

September 3, 2009

Firmware Update for VZ-C12³, VZ-C32³, VZ-9plus³ and new versions of VZ-C12², VZ-C32² and VZ-9plus (units with new mainboard, sold since summer/autumn 2008).

September 3, 2009

Firmware Update for EYE-12 and SCB-12

July 31, 2009

Firmware Update for VZ-8 and VZ-8plus (please note that these older units can only be updated with the RS-232 Firmware Update Utility)

July 10, 2009

Certificates of WolfVision's ISO 9001 and ISO 14001 certification (can be found in Company Profile of WolfVision Austria and in Dealers Area)

July 1, 2009

Firmware Update for VZ-8light², VZ-8light³, VZ-8plus² and VZ-8plus³

June 18, 2009

Press Release of new Visualizer VZ-9plus³ (Third Edition) which was introduced yesterday at Infocomm USA in Orlando with great success.

June 5, 2009

New Firmware for cameras EYE-12 and SCB-12

April 21, 2009

Updated support documents for VZ-9plus and Ceiling Visualizers:
RS232/LAN/USB-protocols and description of bulit-in webserver of Visualizers

April 21, 2009

New application report about Visualizer VZ-9plus in at Steininger GmbH, Germany (Training application in industry)

March, 20, 2009

New application report about camera EYE-12 at Wohlhaupter Precision Tools, Germany (Training application in industry)

March, 20, 2009

Updated Serial (RS232), LAN and USB Protocol of EYE-12, SCB-12, VZ-9plus (serial number 1008068 and upwards), VZ-C12² (serial number 1009412 and upwards), VZ-C32 (serial number 1011797 and upwards), VZ-C12³and VZ-C32³ in HTML and PDF format.

March, 20, 2009

User manual and installation manual of VZ-C12³ and VZ-C32³

March, 20, 2009

New version 1.8 of Connectivity Software for Windows 2000, XP and Vista.
32-bit and 64-bit version.

(If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.)

March, 16, 2009

Firmware Update for VZ-C12³ and new versions of VZ-C12² and VZ-9plus (units with new mainboard, sold since summer/autumn 2008).

February 23, 2009

Many updated support documents: Updated RS232/LAN/USB-protocols, dimension drawings for VZ-C12³ and VZ-C32³, updated user manuals, updated description of bulit-in webserver of Visualizers

February 23, 2009

Description of supported Room Management Systems updated

February 17, 2009

New version of Firmware Utility for RS232 port and Dealers Area updated with new Ceiling Visualizers

February 13, 2009

Final brochure of Ceiling Visualizers VZ-C12³ and VZ-C32³ (Third Edition) and update of most other WolfVision brochures (adapted to current Corporate Design)

February 10, 2009

Detailed brochure (PDF) of new Ceiling Visualizers VZ-C12³ and VZ-C32³ (Third Edition)

February 3, 2009

Various updates introducing new Ceiling Visualizers VZ-C12³ and VZ-C32³ (Third Edition) which were exhibited for the first time today at ISE Amsterdam 2009.

The most important new pages are:
- Introduction brochure (PDF)
- Detailed information page (HTML)
- Detailed (preliminary) brochure (PDF)
- New Product Line brochure (PDF)
- Press release (HTML)

New version 1.7.2 of Connectivity Software for Windows 2000, XP and Vista.
32-bit and 64-bit version (first official release after completing the BETA test period)

(If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.)

Design and navigation of start page adapted.
All product information can now be accessed from the new products page.
(English and German homepage)

Serial Protocol of VZ.9(plus) updated
Serial Protocol of VZ-C12, VZ-C12² and VZ-C32 updated
All Ethernet protocols updated

Exhibitions page updated

New version 1.7 of Connectivity Software for Windows 2000, XP and Vista.
(If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.)
Please note that this version of the Connectivity Software is required, for the latest firmware version of the cameras EYE-12 and SCB-12.

Version 1.7 BETA of Connectivity Software for 64-bit Windows Vista 64 and XP 64.
Please note that this version for 64-bit Windows is still a BETA version and does not work as stable as the 32-bit version (see above).

Information page about WolfVision's new company building in Klaus / Austria

Firmware Update for EYE-12 and SCB-12 (New features: Authentication, Multicast/Singlecast Switching and many more ...)
Please note that this firmware version can not work together with older versions of the WolfVision Connectivity Software. Please update the WolfVision Connectivity Software to version 1.7 or higher.

Serial Protocol of VZ-8light³ and VZ-8plus³

Firmware Update for VZ-C12² and VZ-9plus (This update is only for units with new mainboard, sold since summer/autumn 2008)

Firmware Update for VZ-8light², VZ-8light³, VZ-8plus² and VZ-8plus³

New version of Firmware Update Utility for serial port (RS 232)

Announcement:
Our headquarter in Austria will move into its new company building in the nearby town Klaus (see webcam of the new building) between July 31 and August 17. We combine this move with our annual company vacation, so during this time the WolfVision headquarter in Austria is inactive.
Our new address is: WolfVision GmbH, Oberes Ried 14, A-6833 Klaus / Austria
Telephone, Fax and E-Mail addresses are the same as before.

Firmware Update for VZ-9, VZ-9plus, VZ-27plus, VZ-27plus², VZ-57plus, VZ-C11, VZ-C12, VZ-C12², VZ-C30 and VZ-C32

New version 1.6 of Connectivity Software for Windows 2000, XP and Vista.
(If Connectivity Software 1.3 or later is already installed on your PC, we recommended to use the "Check for Connectivity Software Updates" function in the help menu of the Connectivity Software for a quick and easy update.)

Detailed brochure for VZ-8light³ and VZ-8plus³ in PDF format (Final version)

Detailed brochure for VZ-8light³ and VZ-8plus³ in PDF format (This is not the final brochure. It will be updated in the next couple of days)

Announcement:
WolfVision decided to not release the VZ-6light Visualizer which was exhibited as a prototype at Infocomm USA. The reason is that our customers felt that with the new VZ-8light³ and VZ-8plus³ the product line is complete and there is no need for an additional model. WolfVision is now the only manufacturer who offers native HD/SXGA- 1-CCD cameras throughout the hole progressive scan productline; and all with 30 frames per second in any output resolution.

Various Updates in "Dealer's Area" (Visualizer pictures, Application pictures, exhibition displays, comparisons (word/excel), tender specs)

New Basic Info Page (HTML) with a lot of information on WolfVision's high quality standards.

Various updates introducing new Visualizers VZ-8plus³ and VZ-8light³ (Third Edition). The most important new pages are:
- Introduction brochure (PDF)
- Detailed information page (HTML)

New Product Line 2008 Brochure (PDF) with information on WolfVision's high quality standards.

English and German homepage updated with new design
(Updates for other languages will follow soon)

Ethernet, USB and Serial protocol of EYE-12 and SCB-12 in HTML/Java (original) or (exported) PDF-format

Description of built-in webserver of VZ-9, VZ-9plus, VZ-27plus, VZ-27plus², VZ-57plus, VZ-C11, VZ-C30, VZ-C12, VZ-C12² and VZ-C32
and
Description of built-in webserver of EYE-12 and SCB-12

Detailed description of WolfVision Connectivity Software version 1.5

New version 1.5 of Connectivity Software for Windows 2000, XP and Vista.
This version included "fast & easy firmware updates". A WolfVision Visualizer or Camera can now be updated with just 4 mouse clicks in a couple of minutes!

New version of Firmware Update Utility for serial port / RS232

Firmware Update for cameras EYE-12 and SCB-12 (check history-file to see what's new)

Updated company profile of WolfVision Austria (Including a graphic of our new company building and link to the webcam of the building site)

New application report about National Portrait Gallery, England (a videoconferencing / distance learning application)

Firmware Update for Visualizers VZ-8light² and VZ-8plus².
This Firmware Update adds Widescreen Support to the VZ-8light² (Available resolutions: 720p HD and WXGA)

FAQ (Frequently Asked Questions) area completely redesigned. This is now a database with search function for units or keywords. The new FAQ section will be expanded on a regular basis.